Disclosure focus
This disclosure asks an organisation to report how much recycled material it uses as an input to make its products or deliver its services. In practice, the focus is on the amount of recycled content actually used during the reporting period, rather than on intentions, targets, or general recycling activity.
The practical question is how broadly this is measured across the organisation’s operations. A complete response should cover the relevant activities and sites included in the reporting boundary, so the figure reflects the organisation’s overall use of recycled inputs rather than only a flagship site or a limited product line.
This LRA educational guidance supports disclosure preparation. For the exact requirements, always refer to the official GRI source.
Before you start
A quick mental checklist before you prepare this disclosure — tick each as you settle it.
Preparation
Key datapoints to prepare
＋ Show GRI 301-2 sub-elements (LRA working checklist)
Work out what share of the materials used to make the organisation’s main products and services comes from recycled inputs.
State that share as a percentage, using the recycled material used in production as the basis.
How to prepare it
1Set the reporting boundary first: decide which products and services sit inside the calculation, and make sure the same boundary is used consistently for the period you are reporting.
2Define what you will treat as recycled input material, and confirm how you will identify the primary products and services that the measure relates to.
3Gather the source records that support the calculation, such as purchasing, production, or material-tracking evidence, so the percentage can be traced back to underlying data.
4Calculate the share as a percentage and present the result clearly, using the same basis throughout so the figure is internally consistent.
5Record any exclusions, assumptions, or changes in method that affect the number, so a reviewer can see what was left out and why.
6Check the final disclosure against the official source to confirm the scope, definitions, evidence, and reported percentage all align before publication.
Request the data
Request recycled-content input data from Operations
Translate the disclosure into an internal business question — then adapt it to your organisation's own language.
What share of the materials used in our product and service output came from recycled sources during the reporting period?
Use your organisation’s own terms first, then map them to the reporting question. For example, if your teams talk about feedstock, raw materials, purchased components, or recycled content, keep that language in the request and only translate it afterwards for reporting. Adapt this to how your business tracks production, purchasing, and material flows, and check the source guidance before sign-off.
Weak request
Can you send the GRI 301-2 recycled input materials data for the year?
Why it fails: It uses framework language only, does not say which internal teams or material groups are in scope, and gives no clue about the basis, source system, or how the figures should be returned. That makes it harder for the owner to respond quickly and consistently.
Better request
Can you send the material input figures for [reporting period] for [sites/product lines in scope]? Please include the total amount used, the amount from recycled sources, the basis used, any estimates or exclusions, and the source extract. Please use your normal internal category names and I’ll map them for reporting.
Industry examples
Draft your disclosure
Notes that turn data into a disclosure
LRA training templates — adapt them to your organisation, and check the official source before sign-off.
Method note
State how you defined recycled material, what you counted as the production input base, and whether the figure covers all main products and services or only the parts for which data were available.
Context note
Explain what the percentage says about how much recovered material is being built into the organisation’s core offerings, and note whether the figure reflects a broad shift in sourcing or only a limited part of the business.
Fluctuation statement
If the share moved materially, link the change to practical drivers such as supplier changes, product redesign, availability of recovered feedstock, or changes in what was included in the calculation.
Content index entry
GRI 301-2 Recycled input materials used — [location / page] / [notes]
Download Centre
Preparation tools & forms
Professional preparation tools for GRI 301-2 — free with an LRA Community membership. Register once (it's free) and every download unlocks, together with the Disclosure Library, templates and the LRA AI-assistant.
Free · Community members
Assurance readiness
For each claim, check the evidence
Evidence pack to prepare
Common reporting gaps
A percentage is stated without the underlying counts (numerator and denominator).The denominator — what the figure is a share of — is not explained.Partial scope is reported as if it were complete coverage.One-off activities are counted as if they were ongoing programmes.Boundary or period changes that move the figure are not flagged.Exclusions from the reported scope are not listed or explained.
Common gaps
Mistakes to avoid when collecting the data
Wrong owner
The request goes to a team that does not hold the purchasing, production, or materials records, so the figure is built from second-hand estimates instead of the source system.
Framework language first
People ask for the metric using reporting jargon rather than the business names for recycled feedstock and finished output, which leads to confusion and the wrong data pull.
Scope left vague
No one agrees which product lines, sites, or material streams are in scope, so different teams collect different slices of the business and the result cannot be reconciled.
Wrong time basis
The data is taken from a different reporting period or a mismatched cut-off date, so the percentage does not line up with the rest of the reporting pack.
Mixed counting method
One team counts by weight while another uses spend, units, or invoices, so the numerator and denominator are built on different bases and the percentage is distorted.
Source labels lost
The original tags from the ERP, supplier file, or lab record are stripped away during consolidation, making it impossible to trace which recycled material entries were included.
Separate populations merged
Recycled material used in one product family is blended with data from another line that should be tracked separately, so the final number hides important differences.
Evidence details missing
The file contains a percentage but no date, source reference, or preparer note, so reviewers cannot tell where the number came from or whether it was current.
No sign-off trail
The draft is circulated without a named reviewer or approval record, leaving no clear trail of who checked the calculation before it was used.
Where judgement is often needed
Set the reporting perimeter after acquisitions or disposals
Use the same business boundary you apply for the rest of the period, and if a buy-in or sale changes what sits inside the group, explain whether the figure reflects the new shape for the full year or only from the change date.
Choose one rule when local labels differ
Where countries or sites describe recycled feedstock differently, pick a single internal rule for what counts, apply it consistently, and note any exclusions or inclusions that were needed to keep the measure comparable.
Decide how to treat mixed or borderline material streams
If a material stream is partly recycled and partly not, make a clear judgement on whether to include only the recycled share or to leave it out, and describe the basis used.
Align the measure with the production line you are reporting on
If recycled material is used in some products, sites, or processes but not others, state the operational scope used for the calculation so readers can see which output lines are covered.
Fix the timing basis for the year-end figure
Choose whether the percentage is built from purchases, consumption, or another internal stock-and-flow basis, keep that basis stable, and explain any cut-off or timing adjustments.
Use estimates only where direct records are incomplete
When weighbridge, supplier, or batch records are missing, estimate the recycled share using a documented method, disclose that estimate was used, and keep the method consistent from period to period.
State how you handled rounding
Round the percentage in a way that does not distort the underlying calculation, and if small changes in the inputs move the published figure, explain the rounding approach used.
Aggregate enough to protect sensitive supplier data
If supplier-level or site-level detail could identify a commercial source, combine the data to a higher level before reporting and say that the published percentage is a grouped figure.
Examples
Illustrative examples
Synthetic, written by LRA — not from a company report, not text from any standard.
Illustrative (synthetic) example — Food manufacturing
*Synthetic illustration only.* We calculated the share of recycled material going into the products and services we make, using the total input mass for the period as the base. - In this example, our primary output used 2,400 tonnes of input material in total, of which 900 tonnes came from recycled sources. - That means recycled content made up **38%** of the material we used to produce our main goods and services.
This example shows how a reporter can present the recycled-content share for its main output in plain language, with a simple total-and-part calculation that rounds to a whole percentage.
Illustrative (synthetic) example — Consumer electronics assembly
*Synthetic illustration only.* We measured the recycled material used in making our core products and services against the full amount of material we put into that production. - For the period shown here, our main output required 1,250 kilograms of input material overall, including 500 kilograms from recycled sources. - On that basis, recycled material represented **40%** of the inputs used for our primary products and services.
This example uses a different sector and a different scale, but the same idea: report the recycled portion of the materials used to make the organisation’s main products and services, with the percentage derived from the part divided by the total.
Company reports
How companies report GRI 301-2
Real reports where this topic is disclosed. These are report practice, not exact disclosure templates to copy.
Godrej Properties Limited
Real Estate · India · 2025
Godrej Properties Limited’s Integrated Report 2024-25 includes a reported percentage value for recycled input materials by weight or volume, linked to their Green Building commitment and referenced on page 263. This indicates some disclosure of materials used with recycled content as part of their sustainability reporting. However, the report does not provide further detailed data or clarity on the total input materials or the proportion of recycled or reused materials beyond this mention, as seen from the limited extract on page 141.
Sims Limited
Solid Waste Management Utilities · Australia · 2025
Sims Limited's 2025 Sustainability Report provides a clear datapoint on recycled input materials, stating that nearly 100 per cent of their inputs are secondary materials (p.65). This is the strongest covered evidence related to the disclosure. However, the report does not provide further quantitative details, such as exact percentages or breakdowns, nor does it clarify other related aspects like sourcing regions or verification methods.
JSW Steel Limited
Mining — Iron, Aluminum, Other Metals · India · 2025
JSW Steel Limited's Integrated Annual Report FY 2024-25 includes a covered datapoint on recycled input materials used, referenced on page 109, indicating some disclosure related to reclaimed products and packaging materials. The report also mentions targets related to sustainability and energy transition on page 49, though these are not directly linked to recycled input percentages. However, the report lacks clear, detailed quantitative data or percentage values explicitly tied to recycled input materials beyond the brief mention on page 109, and other pages provide unrelated information, leaving the extent of disclosure on recycled content somewhat unclear.
✓ LRA AI Assistant · Human-in-the-loop
Ask Study Studio AI assistant about this disclosure
Get a practical answer for your reporting context. Your first answer is free — create a free account to continue the conversation.
TryHow do I prepare GRI 301-2?What data do I need to collect?Where can I see a real-report example?What mistakes should I avoid?
1 free answer
Check your understanding
Scenarios to work through
A manufacturer uses 40 tonnes of recycled feedstock and 60 tonnes of virgin feedstock to make a batch of primary products. The reporting team also has recycled material in packaging, but that packaging is not part of the main products being sold.
QShould the recycled packaging be included in the percentage for this disclosure, or only the recycled material used in making the primary products and services?
Reveal model answer →Hide answer ↑Only the recycled material that goes into making the primary products and services belongs in the calculation. In this case, the 40 tonnes used in the product batch count, while the recycled packaging does not, because it is not part of the main output being reported. The percentage would be 40% if the total input for those primary products is 100 tonnes.
Why this matters · Keep the calculation tied to recycled material used in the main products or services, not other recycled inputs elsewhere in the business.
A service business uses recycled paper in its office supplies and recycled plastic in staff uniforms, but its reported service output is delivered digitally. The preparer is unsure whether those recycled materials should affect the figure.
QDo office supplies and uniforms belong in the measure if they are not part of the service delivered to customers?
Reveal model answer →Hide answer ↑No. The measure is about recycled input materials used to make the primary products and services being reported, so office supplies and uniforms are outside the scope unless they are part of that main output. If the service itself has no material input in the usual sense, the team should not pull unrelated recycled purchases into the percentage.
Why this matters · Use only recycled inputs that are part of the product or service being reported.
A producer buys a component that contains both recycled and non-recycled content. The supplier states that 30% of the component is recycled, and the producer uses 200 kg of the component in its main product line.
QHow should the team treat the recycled portion when working out the percentage for the disclosure?
Reveal model answer →Hide answer ↑The recycled share of the component can be counted to the extent it is part of the input used in the main product line. Here, 30% of 200 kg equals 60 kg of recycled content, which can be included in the recycled-input total for that product line. The team should then compare that recycled amount with the total input used for the primary products to calculate the percentage.
Why this matters · When an input contains a recycled share, count only the recycled part that actually enters the main product or service.
A company has two product lines. Product A uses 80 kg of recycled material and 120 kg of non-recycled material; Product B uses 20 kg of recycled material and 80 kg of non-recycled material. The preparer is deciding whether to report each line separately or combine them.
QShould the disclosure be presented as one overall percentage for the primary products and services, or as separate percentages for each product line?
Reveal model answer →Hide answer ↑The figure should reflect the overall share of recycled input materials used for the primary products and services being reported. In this example, the combined recycled input is 100 kg out of 300 kg total input, so the overall percentage is 33.3%. Separate product-line figures may be useful internally, but the disclosure value should be the combined percentage for the reported scope.
Why this matters · Report one percentage for the full reported scope, using consistent totals across the primary products and services included.
Framework references
Related framework references
How this disclosure maps across the major reporting frameworks.
Primary
Related & explore
FAQ
Questions this page answers
For GRI 301-2 Materials, what data do I need to prepare before I start drafting the disclosure?+−
The page says to prepare the recycled input share datapoint. Use the plain-language explainer and the step-by-step preparation section to work out what your organisation needs to gather before drafting.
How do I use the step-by-step 'how to prepare' section for GRI 301-2 Materials in practice?+−
Use it as a working checklist to move from understanding the disclosure to collecting the right information and shaping a draft. The page is designed to help you prepare the disclosure rather than just describe it.
Who should own the GRI 301-2 Materials data collection and sign-off in my organisation?+−
The page does not assign roles, but it is written for sustainability/ESG managers, HR or data owners, and assurance reviewers. In practice, use it to coordinate ownership around the recycled input share datapoint and the evidence pack.
What evidence should I keep for GRI 301-2 Materials so the disclosure is assurance-ready?+−
The page includes an evidence pack with five items for assurance readiness, plus five assurance claims to verify. Use those sections together to build a file that supports the claim, the risk, and the evidence behind the number.
What are the five assurance claims I need to check for GRI 301-2 Materials?+−
The page says there are five assurance claims to verify, each with a claim, risk, and evidence angle. It does not list them in the page summary, so use the assurance section and evidence pack to check what needs support.
What are the common reporting gaps or mistakes for GRI 301-2 Materials, and how do I avoid them?+−
The page includes common reporting gaps and mistakes to help you spot weak points before you finalise the disclosure. Use those notes alongside the preparation and assurance sections to catch missing data, unclear scope, or weak evidence.
How do I turn the GRI 301-2 Materials data into a draft disclosure?+−
The page has a draft-output section with visualisation ideas, narrative starters, and a GRI content-index line. Use those to turn the recycled input share data into a clear first draft for review.
Is there an example disclosure for GRI 301-2 Materials that I can use as a model?+−
Yes. The page includes synthetic illustrative example disclosures, including a quantitative data table, which you can use as a drafting aid rather than as a real-company benchmark.
Can I use the workbook and printable card from the Download Centre to prepare GRI 301-2 Materials?+−
Yes. The Download Centre includes a Prep & Assurance workbook in .xlsx format and a printable Library Card in .pdf, both intended to support preparation and assurance readiness.
How can I use the 'From company reports' table for GRI 301-2 Materials?+−
The table links to real published reports where the topic is disclosed, so you can see how others have presented it in practice. Use it as a reference point, not as a template to copy.
What is the closest ESRS correspondence for GRI 301-2 Materials, and can I reuse the data?+−
The page says the closest ESRS correspondence is ESRS E5 (Resource Use and Circular Economy). You can treat the data as reusable across reporting work, but the page does not say the requirements are identical.
More questions this page can help with
GRI 301-2 Materials recycled input share: what should I gather before drafting the disclosure?GRI 301-2 Materials: how do I use the prep and assurance workbook?GRI 301-2 Materials evidence pack: what should be in it for assurance?GRI 301-2 Materials common mistakes: what should I check before submission?GRI 301-2 Materials example disclosure: is there a synthetic table I can use?GRI 301-2 Materials draft narrative: what wording starters are provided?GRI 301-2 Materials content index line: how do I draft it?GRI 301-2 Materials assurance claims: how do I verify them?GRI 301-2 Materials data owner: who should own the recycled input share metric?GRI 301-2 Materials company reports: where can I see published examples?GRI 301-2 Materials ESRS E5: can I reuse the same data for cross-framework reporting?GRI 301-2 Materials plain-language explainer: how should I use it to brief my team?
Free · LRA Community
Get your GRI 301-2 tools — free
Your preparation tools are free for LRA Community members and students. Register once (it's free) and your download starts right away — plus the Disclosure Library, templates and the LRA AI-assistant.
✓
You're in — your download is starting
Your file is downloading now. Your Community Cabinet — with the Disclosure Library, templates and the LRA AI-assistant — is ready too.
Open your Cabinet →